AutoCAD Tips & Tutorials

Rotating the Crosshairs/Drawing at an Angle

Need to create a drawing at an angle? AutoCAD offers several options:

• Use polar tracking to guide you. Right click the POLAR button on the Status bar and choose Settings. Set the angles you want and click OK. For example, a 45° angle will display tracking guides every 45°. Click OK. Now you can use polar tracking and direct distance entry (just type in the distance of a line) to draw.
 
• Rotate the crosshairs. Thanks to Garry Stack of CADCO in Cork, Ireland for his tip suggesting this method. He likes it better because he finds that the tracking guides get in the way. To rotate the crosshairs, right-click the SNAP button on the Status bar and choose Settings. Type a value, such as 45° for the Angle and click OK. Now your crosshairs are at that angle. However, you need to use ORTHO to use direct distance entry using this method. Garry suggests making toolbar buttons for commonly used angles. For example, the macro to rotate the crosshairs 45° would be 'snapang;45; I think it would be useful to have a 'snapang;0; toolbar button as well. Lots of people seem to like this tip. Jack Foster writes that he has a button with the following macro: snapang;0;;\ This sets the snap angle to 0 regardless of what it currently is, then goes back to the snapangle variable and waits on the user to type in the new angle you want. Matt Doyle likes this version: ^C^Csnap;r;\\;off; This lets you set the angle by picking two points, then shuts off the snap command (which otherwise is turned on and snaps you to the grid). Ian Matthews contributed this pair: 
  'snap r 0,0;per;
  'snap r ;0;
  The first one matches the cursor of a line you select. The second one returns the snap angle back to 0. He puts these on two toolbar buttons.


• Create a User Coordinate System (UCS). To rotate the axes by 45°, choose Tools>New UCS>Z and type 45. Press Enter. (Or, as Jimmy Wesley suggests, type ucs, z and type 45.) You can use Polar Tracking with this UCS if you wish. Typing relative coordinates will be simplified (for example, @3,0 instead of @3<45). Jimmy further suggests a quick way to return to the default axes: type ucs and press enter twice. Andrew Hudson suggests creating your UCS this way. Draw a line at the angle you need, such as 7.6 degrees. Choose Tools > New UCS > Object. At the prompt, pick the line nearest the end that you want to be your new 0,0 point. Alan Praysman has a custom toolbar button that works as a toggle to rotate the UCS and then restore the WCS. To rotate the UCS, click the button and pick the endpoints of a line to specify the angle. Here's the code:

Back to main tips menu for more tips

                                  Home  |  AutoCAD  |  PowerPoint  | E-Store | About  | Links | Contact | Site Map
Copyright Ellen Finkelstein, Inc.