Categories

AutoCAD 2015 and AutoCAD LT 2015 BibleAutoCAD 2015 and AutoCAD LT 2015 Bible

The most comprehensive AutoCAD book around!

Squeeze or stretch single-line text to fit in a space with TEXTFIT

The TEXTFIT command lets you easily squeeze or stretch existing single-line text (TEXT or DTEXT) so you can fit it into a defined space, such as a title block.

TEXTFIT doesn’t work with multi-line text (MTEXT).

When you start the command, you select the single-line text and TEXTFIT puts a drag-line under the text. Just pick the desired endpoint and you’re done. If you want to change the start point of the text, use the Start Point option, pick a start point and then an end point.

Watch the video to see how it works.

TEXTFIT works with existing text, but you can fit single-line text into a space when you create it, using the Align or Fit Justify options. Here are the steps:

Did you find this tip helpful?
Don't miss new tips!

Plus get a free Dynamic Blocks tutorial

Enter your name and email below

  1. Start the TEXT command.
  2. At the Specify start point of text or [Justify/Style]: prompt, type j and press Enter.
  3. At the Enter an option [Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR]: prompt, type a for the Align option or f for the Fit option and press Enter.
  4. At the Specify first endpoint of text baseline: prompt, specify a start point for the text.
  5. At the Specify second endpoint of text baseline: prompt, specify an endpoint. You may want to turn on Ortho before specifying the endpoint.
  6. If you chose the Fit option, it asks you to specify a height. This option maintains that height, distorting the letters if necessary. The Align option changes the height of the text to maintain the proportion of the letters.
  7. Type your text and press Enter twice to end the command.

Thanks to Tommy Holden for the part of this tip relating to TEXTFIT.

 

2 comments to Squeeze or stretch single-line text to fit in a space with TEXTFIT

  • SETH

    This is a lie. This will not work for you as the program cant even recognize that the text is actually text, thus the command does not and will not work.

  • J. Olson

    My students and I are having difficulty with the single line text,justify, fit. 1st endpoint and 2nd endpoints are entered, text height and the cursor then for some reason shifts about 6 degrees. When we zoom out, the entire grid has rotated about 6 degrees. We hit escape or Top on view cube and the grid returns to normal but text is angled. My software is updated each year and this is the first year the command does not work. Any ideas?

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>