You may want to draw in 3D, but if you need to deliver drawings in 2D, in several views, how do you convert them? In other tips, “Converting 3D drawings into 2D drawings,” and “Convert a 3D solid to a 2D drawing with a hidden view,” I’ve discussed some methods, but this excellent method uses the FLATSHOT command. It was introduced in AutoCAD 2007.
The FLATSHOT command offers you much more flexibility if you want to create the drawing in model space with several views. In this tutorial, we’ll convert this solid to a 3-view drawing.
These steps assume that you are in the 3D Modeling workspace.
- Make a copy of your drawing because at the end of the process you’ll delete the 3D objects.
- Create a layer for each of the views. As you create each view, you’ll need to turn off the layers for the previous views. In this example, I made 3 layers for the 3 views–Top, Front, and Auxiliary.
in a Week: Teach Yourself
Aenean sollicitudin, lorem quis bibendum auctor, nisi elit ipsum sagittis.
- FLATSHOT works best with parallel projections. To switch to a parallel projection, on the View tab, click Orbit. Then right-click and choose Parallel. Press Esc to end the ORBIT commeand.
- Change the value of UCSORTHO to 0. You’ll be switching to orthographic views, but you don’t want to change the UCS each time you switch to a orthographic view.
- Make the layer of your first view current, in this case, the Top layer on the Home tab’s Layer drop-down list.
- On the View tab’s View drop-down list, choose the corresponding viewpoint (Top in this example).
- To start the FLATSHOT command, go to Home tab> Sections panel (expanded)> Flatshot, or just type the command name. The Flatshot dialog box opens. In this situation, in the Destination section, choose Insert as New Block, as you see here.
- At the bottom of the dialog box, you choose options for foreground and obscured lines. These options determine how the 2D profile will look. You can choose the colors for the profile and for obscured lines. To create a hidden view, uncheck the Show check box.
- Click Create. The dialog box closes and you’re back in your drawing.
- Follow the usual prompts to insert the block. The exact location at this point is not important; you can move the blocks later. For some reason, the insertion point is somewhere off the block, so you may need to zoom out to see where to place the block (or to find the block after you place it). Don’t worry if one or more of the views looks wrong. Because FLATSHOT is laying the profiles on the XY plane, from another viewpoint the profiles can look wrong, like you see here.
- Turn off the layer for the previous view. (Click OK when the dialog box tells you you’re turning off the current layer.) You need to do this because FLATSHOT works on all layers that are on or thawed. So you turn off the previous layer so that the next FLATSHOT operation doesn’t make a block of your previous 2D blocks! In our example, we turned off the Top layer.
- Repeat steps 5-10 for each of your views.
- Turn on all of your layers. Switch back to Top (plan) view. Your 2D blocks should look right now.
- Delete your original 3D object and move your 2D blocks to the desired location. Here’s the result, with top and front views and a hidden auxiliary view.
This method is easy and effective when you need to create several 2D views of a 3D model.